行業動態
產品
聯系嘉瑞杰
山東嘉瑞杰機械科技有限公司
聯系人：王經理
電話：0531-88670722
手機 : 15866677695
地址：濟南市天橋區梓東大道鑫茂科技城143號樓102室
制造手板模型需求留意什么
來源：http://m.scyyst.com作者：山東嘉瑞杰機械科技有限公司發布時間：2022-10-13
手板模型上的各種零件應有足夠的強度及剛度，避免運用過程中損壞和變形，手板模型上的各種零件應有足夠的強度及剛度，避免運用過程中損壞和變形，緊固零件要有防松動措施，避免不測傷害操作者。濟南手板廠家為您講解下更多事項。
Various parts on the hand model shall have sufficient strength and stiffness to avoid damage and deformation during operation. Various parts on the hand model shall have sufficient strength and stiffness to avoid damage and deformation during operation. Anti loosening measures shall be taken for fastening parts to avoid accidental injury to operators. Jinan prototype manufacturer will explain more things to you.
不允許在加工過程中發生廢料或工件飛彈現象，影響操作者的留心力，以致?lián)魝僮髡?。別的要避免沖裁件毛刺割傷人手。手板模型手板模型制作加工時的留心事項1.手板模型工藝路途制定可先依照工件需求分兩次加工。
It is not allowed to produce waste materials or workpiece missiles in the processing process, which will affect the operator's attention and cause injury to the operator. For others, avoid cutting hands by burrs of blanking parts. Cautions during the production and processing of the prototype. 1. The process route of the prototype can be divided into two processes according to the needs of the workpiece.
先加工手板模型的外觀內壁，銑好基準，再翻轉180度裝夾，加工表面面及按鍵屏幕方位。若先加工表面面，再加工內壁，則難以定位裝夾中止二次加工。假設手板模型的壁厚只要1.5mm,加工表面面時易呈現變形、破碎的現象。
First, process the exterior inner wall of the hand model, mill the benchmark, then turn over the 180 degree clamp, and process the surface and key screen orientation. If the surface is processed first and then the inner wall is processed, it is difficult to locate the clamp and stop the secondary processing. Assuming that the wall thickness of the hand model is only 1.5mm, it is easy to appear deformation and breakage when machining the surface.
如有在已加工好的型腔中參與填充物做出支撐。這樣可避免加工出通孔部位，再填充石膏，否則很難別離廢品和填充物。
If any, the filler shall be used to support the machined cavity. In this way, it can avoid processing through holes and filling gypsum, otherwise it is difficult to separate waste products and fillers.
要先修正修剪的曲面，掩蓋住表面通孔方位，中止正面加工，然后再中止挖槽完成通孔加工，避免加工到通孔部位加工時刀路起伏不順暢，切削力不平均等現象。
The trimmed surface shall be corrected first to cover the through hole orientation on the surface, and then the front face processing shall be stopped, and then the slotting shall be stopped to complete the through hole processing, so as to avoid such phenomena as unsmooth tool path fluctuation and uneven cutting force when machining to the through hole.
通常一家高質量的手板模型廠無論是手板模型的精度公役、或者是表面處置、或者是效勞態度都是有一定的確保的，您對此有什么問題或者需求就來我們網站http://m.scyyst.com咨詢吧！
Generally, a high-quality prototype factory ensures the accuracy, surface treatment and service attitude of the prototype. If you have any questions or needs, please come to our website http://m.scyyst.com Consult!
相關資訊
手板制作加工時注意事項
2024-04-11手板加工如何服務好客戶?
2024-04-09手板加工的過程及方式
2024-04-06快速成型的基本原理構成有哪些？
2024-02-27工業產品設計中常見手板件的制作方式
2024-02-23ABS手板模型的優勢有哪些？
2024-02-21鋁合金手板模型制作手法與維護
2024-02-10鋁合金手板模型的氧化工藝介紹
2024-02-10汽車手板模型制作的低壓灌注工藝
2024-02-06手把手教你怎么選機箱機柜定制工廠
2024-01-27
